Upgrading Your Volgas HVAC System: Seamless Installation of a Lanos Motor
In this detailed tutorial, we guide you through the process of replacing the stock HVAC motor in your Volga with a powerful Lanos motor. Discover the enhanced airflow and whisper-quiet operation that this simple swap can bring to your vehicle. Our comprehensive step-by-step instructions and valuable insights make this an accessible upgrade for any DIY enthusiast.
![](https://img.youtube.com/vi/D0nGo_IaCQQ/0.jpg)
Revolutionize Your Volgas Air Comfort: A Step-by-Step Guide to Lanos HVAC Motor Swap
What are the key benefits of swapping the HVAC motor in a Volga with a Lanos motor?
The key benefits of this swap include:
- Significantly increased airflow on both the low and high fan settings, providing a more powerful and efficient HVAC system.
- Quieter operation, as the Lanos motor is notably less noisy than the stock Volga motor.
- Compatibility with the existing wiring and installation, making the swap a relatively straightforward process.
- Potential for further customization, such as adding additional fan speeds from the Lanos system.
What modifications are required to fit the Lanos motor into the Volgas HVAC system?
To fit the Lanos motor into the Volgas HVAC system, a few minor modifications are necessary:
- The top portion of the Lanos motor needs to be trimmed down by about 3-4mm to clear the Volgas housing.
- A rubber grommet or similar material should be used to provide a secure and snug fit for the Lanos motor within the Volgas HVAC housing.
- No additional wiring or relays are required, as the Lanos motor can be directly connected to the Volgas existing HVAC wiring harness.
Does the Lanos motor require any special cooling or air intake considerations when installed in the Volga?
No, the Lanos motor does not require any special cooling or air intake considerations when installed in the Volga. The motor is designed to be self-cooling during operation, and the open-air environment within the Volgas HVAC system is sufficient to provide adequate cooling. The only recommendation is to install a simple mesh or fabric filter over the motors air intake to prevent debris and dust from entering the motor assembly.
How significant is the performance improvement from the Lanos motor compared to the stock Volga motor?
The performance improvement is quite significant. On the low fan setting, the Lanos motor provides around 1.5 times the airflow of the stock Volga motor. On the high fan setting, the airflow is approximately doubled, resulting in a much more powerful and efficient HVAC system. The difference is very noticeable in terms of both air volume and velocity, providing a more comfortable cabin environment.
Are there any potential drawbacks or considerations to be aware of when swapping the Lanos motor into the Volga?
The main considerations are:
- The Lanos motor has four fan speeds, while the Volgas wiring only supports two speeds. Modifying the wiring to take advantage of the additional speeds is possible but adds complexity.
- The Lanos motor may have a slightly different mounting pattern, so some minor fabrication or adaptation of the mounting points may be required for a perfect fit.
- Ongoing monitoring of the Lanos motors performance and any potential issues, such as excessive noise or vibration, is recommended, as the long-term reliability of this non-OEM component is unknown.